HOME PAGE VEHICLES DEALER INFO SERVICE & PARTS SECURE YOUR PRICE SPECIALS PRE-OWNED QUALITY CARS

Quality Subaru Service Menu

SERVICE A
  • Change engine oil and filter
  • Lube chassis, hinges and locks as needed
  • Set tire pressure
  • Inspect undercarriage
SERVICE B
  • Change engine oil and filter
  • Install BG MOA (oil additive)
  • Lube chassis, hinges and locks as needed
  • Check and correct all fluid levels
  • Set tire pressure
  • Inspect steering gear and linkage
  • Inspect drive axle boots and suspension components
  • Inspect exhaust and heat shields
  • Rotate tires and inspect for correct wear
  • Inspect brakes; clean and adjust as needed
  • Adjust clutch if applicable
  • Service battery: clean terminals and top off electrolyte level
  • Road test vehicle
SERVICE C
  • Perform vehicle safety inspection
  • Change engine oil and filter
  • Install BG MOA and MI3000
  • Replace engine air filter elements
  • Replace fuel filter
  • Replace PCV valve
  • Check and set engine idle speed
  • Inspect and adjust engine drive belts
  • Check A/C operation and vent temperature
  • Lube chassis, hinges and locks as needed
  • Check and correct all fluid levels
  • Inspect steering gear and linkage
  • Inspect drive axle boots and suspension components
  • Inspect exhaust and heat shields
  • Rotate tires and inspect for correct wear
  • Inspect brake fluid lines and hoses and parking brake cable
  • Inspect brakes; clean and adjust as needed
  • Service battery: clean terminals and top off electrolyte level
  • Set tire pressure
  • Adjust clutch if applicable
  • Road test vehicle
SERVICE D
  • Engine tune up
  • Replace spark plugs (non-platinum type)
  • Replace engine air filter elements
  • Replace fuel filter
  • Replace PCV valve
  • Inspect distributor cap, rotor and ignition wires
  • Check and set ignition timing; check advanced operation
  • Check and set engine idle speed
  • Inspect vapor and fuel lines
  • Inspect cooling system and change coolant
  • Change engine oil and filter
  • Service battery: clean terminals and top off electrolyte level
  • Inspect and adjust engine drive belts
  • Install BG MOA and MI3000
  • Check and correct all fluid levels
  • Scope engine and test emission level
  • Rotate tires and set tire pressures
  • Check A/C operation and vent temperature
  • Inspect tires for correct wear
  • Inspect brakes; clean and adjust as needed
  • Inspect steering gear and linkage
  • Inspect drive axle boots and suspension components
  • Inspect exhaust and heat shields
  • Inspect brake fluid lines and hoses and parking brake cable
  • Lube chassis, hinges and locks as needed
  • Adjust clutch if applicable
  • Road test vehicle
  Prices are subject to change